What changed on June 1, 2026

Cabinet of Ministers Resolution No. 194, dated March 31, 2025 established an annual tariff indexation mechanism for electricity and gas for legal entities — at the inflation rate, but no more than 10% per year. The first increase took effect on June 1, 2026.

This is not a crisis or an exception. It is the new operational reality. Every year your bill will rise automatically — even if you don't expand, don't change equipment, and operate as usual.

Most commercial property owners discover this from the invoice. Not from a consultant. Not from the news. From the invoice — after the money has already left.

The gap widens every year: a calculation based on official data

Take a typical commercial property with a current electricity bill of 100 million soums per month. Here is what happens to costs with annual tariff growth — and how Uspace changes the picture:

Why your costs grow faster than you think

This is a systemic problem. Most property managers and building owners in Uzbekistan still manage energy consumption the way they did ten years ago:

• No real-time monitoring — data is read from the meter once a month, after the fact. Overspending is discovered too late.
• Engineering systems — HVAC, lighting, pumps — run on a fixed schedule or manually, without accounting for the building's actual occupancy.
• Equipment keeps consuming energy outside working hours, on weekends, in underoccupied zones — simply because no one is watching.
• No single point of control: climate, lighting, and electrical systems are not connected and cannot be jointly optimised.

As a result, up to 20–30% of consumed energy is wasted. At the old tariffs, this was unpleasant. With annual growth of 10%, it becomes a material line item in your losses.

The solution: Uspace — a platform that saves automatically

We don't sell "energy efficiency" as a concept. We deliver measurable results: 20% reduction in electricity OPEX and 30% fewer unplanned equipment downtime events.

• Integration without disruption. The Uspace RTU controller connects to existing engineering equipment via open industrial protocols — Modbus and BACnet. Over 50 protocols are supported. No equipment replacement required — we connect to what is already on site.
• AI optimisation in real time. The system continuously analyses consumption patterns, building occupancy, and external conditions, managing loads 24/7. A digital twin of your building enables consumption forecasting and proactive peak load management.
• Edge Computing — works without the internet. Processing intelligence stays on site. If connectivity drops, the system keeps running; data is buffered and synchronised automatically when the connection is restored.

This solution deploys twice as fast as conventional systems and delivers the first measurable results within 30 days.

Checklist: audit your building today

To avoid discovering tens of millions of soums in unplanned costs at the end of the year, check these 5 points right now:

• Real-time visibility: Can you see right now how much electricity your building is consuming at this minute? If not, you are managing blind.
• Night and weekend consumption: How much energy does the building use when no one is in it? A healthy baseline is 15–25% of daytime usage. Higher means direct waste.
• System integration: Are your HVAC, lighting, and access control systems connected? Siloed systems cannot be jointly optimised.
• Communication protocols: Does your engineering equipment support Modbus or BACnet? If yes, integration with Uspace takes days, not months.
• Historical data: Do you have month-by-month consumption data for the past 12 months? Without this, it is impossible to estimate the savings potential.

Raqamli transformatsiya (Digital transformation)

Haqiqiy raqamli transformatsiya — bu shunchaki qimmat uskunalar emas, balki shaffof nazorat tizimidir. Agar avtomatlashtirish toʻgʻri yoʻlga qoʻyilmasa, u cheksiz sozlash ishlariga va ortiqcha xarajatlarga aylanib ketadi.

Masofaviylik muammosi: Aloqa — bu imtiyoz bo'lganda

Masofaviy obyektlarda 4G yoki optik aloqa ko'pincha yo'q. Standart PLC (dasturlanadigan mantiqiy kontrollerlar) bunday sharoitda serverga ma'lumot uzatolmay, ishdan chiqadi.

Uspace loyihalarida biz Cloud Automation va Edge computing texnologiyalariga tayanamiz. Bizning OctaNode IoT shlyuzimiz ma'lumotlarni joyida qayta ishlaydi, siqadi va hatto 100 kbit/s kanal orqali ham uzatadi. Aloqa uzilsa, tizim avtonom ishlaydi va ma'lumotlarni buferda saqlaydi.

Texnik topshiriq (TT): Muvaffaqiyatning 50 foizi

Noaniq TT — har qanday loyihaning dushmani. «ANDIJANPETRO» MChJ XK bilan hamkorlikda biz vazifalarni aniq belgilab oldik. Bu bizga bitta brendga bog'lanib qolmagan moslashuvchan tizimni qurishga imkon berdi.

Professional avtomatlashtirish afzalliklari:

• Yong'in o'chirish paneli holatini real vaqtda monitoring qilish;
• Modbus qurilmalarini tez va yo'qotishlarsiz ulash;
• DALI, DMX, BACnet protokollarini yagona SCADA tizimiga integratsiya qilish;
• Yoritish nazorati va energiya hisoblagichlarini samarali sozlash.

Smart Building va Sanoat Monitoringi

Binolarni avtomatlashtirish (Smart building) — bu insoniy xatolar, yo'qotilgan parollar va mas'uliyatsiz muhandislarga qarshi raqamli himoyadir. Uspace monitoring tizimi — bu sizning uxlamaydigan va xato qilmaydigan raqamli aktivingizdir.

Audit: Obyektingizda nimani tekshirish kerak?

Masofaviy infratuzilmani boshqarayotgan bo'lsangiz, ushbu bandlar bo'yicha nazorat o'tkazing:

• Mahalliy saqlash: Aloqa uzilsa, ma'lumotlar saqlanib qoladimi?
• Minimal trafik: Kritik signalni uzatish uchun tizimga qancha internet kerak?
• Yagona oyna: Barcha tizimlar bitta SCADA interfeysiga birlashtirilganmi?
• Modbus polling: Qurilmalarga xizmat ko'rsatish vaqti aniq belgilanganmi?